12
Mar 2020

B5-50 Air Capacity

Equipment admin

Purpose:      Creation of compressed air reserve for reducing pressure changes in air lines, pulsation correction and operation of general compressors.

1

 Name and password    B5-50  Air Capacity

2

 Application area   Applies to oil refining, petrochemical, chemical,        metallurgy, food, gas and other industries.

3

 Pressure

–

                 Worker , MPa (kqs/sm2)    5,0 (55)

–

                 Report , MPa (kqs/sm2)    6,3 (63)

–

                 Test, MPa (kqs/sm2)    6,0 (60)

4

 Operating temperature   – 40…+100

5

 Working environment     Air

6

 Addition to corrosion, mm     2

7

 Corrosion rate, mm/year     0,1

8

 Material    09Г2С

9

 Service life, years    20

10

 Wall thickness, m    25

11

 Overall dimensions, mm:

–

                   internal diameter, mm    1200

–

                   height, mm    5000

12

 Weight (empty), kg    4700

 

11
Mar 2020

Snk-type cuttings transport conveyors

Equipment admin

SNK  type cutting transport conveyors are designed for horizontal transportation of sludge removed from the drilling solution as an integral part of the circulation systems used in the drilling of oil and gas wells.

1. Transmission, Entrance section, 3.Exit section, 4. Middle section, 5.Screw, 6. Control block .

Symbol ŞNK-9 ŞNK-12
Engine power, kW 7,5 7,5
Conveyor productivity, m3/hour 12 18
Type of electrical drive NMRV-130 NMRV-130
Electric drive power, kw 7,5 7,5
Number of cycles entrance, rpm 1400 1400
Number of cycles exit, rpm 200 200
Screw diameter, mm 230 (9″) 305 (12″)
Screw step, mm 200 250
Screw thickness, mm 8…10 8…10
Auger screw rotation range, rpm 20…60 20…60
Number of sections 4 4
Working length of sections, m 3 3
Working length of the conveyor, m 12 12
Overall dimensions LxBxH, mm 12260x550x1355 12260x700x1365
Weight, kg 1690 1810
21
Aug 2016

EXPLORATORY DRILLING RIG URB-2.5 A-KamAZ

The rig is designed for fluid circulating drilling of geophysical and cores wells to depth down to 250

EXPLORATORY DRILLING RIG URB-2.5 A-KamAZ

Equipment admin

Timg_09he rig is designed for fluid circulating drilling of geophysical and cores wells to depth down to 250 m by rotary drill pipes 60.33mm and to depth down to 350 m by 48 mm drill pipes, it is also suitable for augerdrilling cluster wells.

 

 

 

Allowable hook load, kN 40
The most height of the hook lifting, m/s 0-3
Design drilling tool rotation speed, 0-7.5
Depth of drilling, m, diameter of drilling pipes, mm 250m 60.3 mm 350m 48 mm
Lenght of drill pipe stand, m 6.0
Mast height from rotary table to crownblock axis, mm 9.500
Mud pump NB-32
Delivery (max), mVsek (Is) 0.009; (9.0)
Мах pressure, Мра (l^/sm^) 4.0 (40)
Overall dimensions of rig, mm 1.200×2.500×3.800
Weight 1^ 14.730
21
Aug 2016

PUMPER УНЦ1-160Х50К

 Designed for hydrolic acid transportation and injection Унц l-160x50K into wells in acidizing of bottom-hole formation zone. The

PUMPER УНЦ1-160Х50К

Equipment admin

img_08 Designed for hydrolic acid transportation and injection Унц l-160x50K into wells in acidizing of bottom-hole formation zone. The pumper, mounted on KRAZ motor vehicle chasis, includes a high pressure pump, a transmission, a tank, a manifold, an auxiliary pipeline…

 

 

Power used, kVt 118
Мах pressure, Мра 50
 Мах ideal feed, dmV& 12.4
  Horizontal
  triplex
Pump type plunger
Overall dimensions, mm 9520x2500x3300
Overall weight, kg 14970
Auxiliary pipe lines
-nominal diametr, mm 3
• total lenght, m 25.5
Nominal inside diametr
 -line of suction, mm 100
 -line of discharge, mm 50
21
Aug 2016

TYPE PIPE-CARRIER

Is intended for transportation of pipes with diameter 325-1420 mm, length 12 m, along various roads and also

TYPE PIPE-CARRIER

Equipment admin

img_07Is intended for transportation of pipes with diameter 325-1420 mm, length 12 m, along various roads and also for transportation of the tube strings (length 36m) outside common roads, along the pipelines being constructed. The pipe-carrier includes the tube- carrying truck, the pole trailer and the stub. The truck is equipped with a rotating conic. The pole trailer is equipped with two conics welded to its frame and is connected with the truck by weight and the stub, the latter being with a two ropes, a cable and a pneumatic hose. Front and back stoppers prevent the pipes from displacement alongside the truck and pillars prevent them sliding aside.

Monting base Урал-4320 truck chassis
Load-carrying capacity, tn 12
Dimensions, mm:  
– length of pipe-carrier (truck) 7349
– length of the semi-trailer 4150
– width 2500
– height 3000
Weight, kg:  
– of the truck with equipment 12620
– total 24845
21
Aug 2016

TANK TRUCK PPC-23

Designed to transport nonaggressive fluids and deliver them to pumpingunits for injection into wells during washing and pressing

TANK TRUCK PPC-23

Equipment admin

img_06Designed to transport nonaggressive fluids and deliver them to pumpingunits for injection into wells during washing and pressing through. The production equipment of the tank truck is mounted on the chassis of the KrAZ-2S8 B1 truck tractor and ЧМЗАП-5524П semi-trailer. The equipment includes a tank, a pumping unit with transmission, a self-ptiminh system, a manifold and other auxiliary equipments.

 

Capacity, 23
Мах mass of transported liquid, t 20
Max capacity of pump, dmV& 33
Мах pressure developed by pump, MPa 0.93
Overall dimensions, mm 5025x2690x3400
Weight (empty), kg 18050

 

21
Aug 2016

COMPUTER NUMERICAL CONTROL CNC

 Specifications Designed for cutting leafs of different sizes and shapes in the thickness of 3-50 mm    

COMPUTER NUMERICAL CONTROL CNC

Equipment admin

img_05 Specifications
Designed for cutting leafs of different sizes and shapes in the thickness of 3-50 mm

 

 

 

 

 

The width of the working zone 1500 mm The width of cutting 1.5-2 mm
The length of the working zone 2500 mm Thickness of cut material 3 – 50 mm
Opening length of the leaf 3000 mm max 6000 Energy consumption 16 kw
The type of cutting plazma Additional tools ucluq katod ucluq kömür
The tool of the cutting plazmatron Normal temperature of environment 5-45C
Cutting accuracy ±0.3-0.5 mm Humidity <95%
Dəzgahın hazırlanma müddəti Время производства The period of production 45 IŞ günü/ рабочих дней/working days
Guarantee 1 il / год / year
 
21
Aug 2016

К 80-50-200 А TYPE PUMP

 Horizontal electrical pump unit is intended for pumping both technical and drinking water as well as other non-explosion

К 80-50-200 А TYPE PUMP

Equipment admin

img_04 Horizontal electrical pump unit is intended for pumping both technical and drinking water as well as other non-explosion and non-flame fluids with viscosity and chemical composition like water, with hard dash not more than 0.1 % of volume and dimensions not more than 0.2 mm. Temprature of pumped fluids 273-358 К (0-85 C). Specifications are as follow

 

Productivity, mVh 45 (12.5)
Pressure, m 40
Pump power, kWt under P=1000 kg/m^ 8.2
4АМ132М2 type electrical motors power, kWt 11.0
1 2